Toro 39922T Troubleshooting

If you are having problems with your Toro 39922T Snow Blower, you are not alone. Many Toro 39922T owners experience issues with their snow blower from time to time, and it can be frustrating to deal with these problems.

I have problems with my Toro 39922T

Toro 39922T Snow Blower Problems

Below are common issues and solutions for the Toro 39922T:

The Toro 39922T machine does not run or does not run continuously.

Cause Solution
  • The battery pack is low on charge.
  • Charge the battery pack
  • The battery is not fully installed in the machine.
  • Remove and then reseat the battery into the machine, making sure that it is fully installed and latched
  • The battery pack is over or under the appropriate temperature range
  • Move the battery pack to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F)
  • The battery pack has exceeded high amperage limits
  • Release the trigger, then press the trigger switch.
  • There is moisture on the leads of the battery pack.
  • Allow the battery pack to dry or wipe it dry
  • The battery pack is damaged.
  • Replace the battery pack
  • There is another electrical problem with the machine
  • Contact your Authorized Service Dealer.

The Toro 39922T machine does not reach full power.

Cause Solution
  • The battery pack charge capacity is too low.
  • Remove the battery pack from the machine and fully charge the battery pack
  • The air vents are blocked
  • Clean the air vents.

The Toro 39922T machine runs, but the machine discharges snow poorly or not at all.

Cause Solution
  • The machine is overloaded.
  • Push the machine with less force, or at a slower pace
  • You are trying to remove too much snow per swath
  • Reduce the amount of snow removed per swath.
  • You are trying to remove extremely heavy or wet snow
  • Do not overload the machine with extremely heavy or wet snow
  • The discharge chute is plugged
  • Unclog the discharge chute
  • The auger/impeller drive belt is loose or off the pulley.
  • Install and/or adjust the auger/impeller drive belt; refer to www.Toro.com for servicing information or take the machine to an Authorized Service Dealer
  • The auger/impeller drive belt is worn or broken
  • Replace the auger/impeller drive belt; refer to www.Toro.com for servicing information or take the machine to an Authorized Service Dealer.

The Toro 39922T battery pack loses charge quickly

Cause Solution
  • The battery pack is over or under the appropriate temperature range
  • Move the battery pack to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F).
  • The machine is overloaded
  • Push the machine with less force.

The Toro 39922T battery charger is not working

Cause Solution
  • The battery charger is over or under the appropriate temperature range
  • Unplug the battery charger and move it to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F).
  • The outlet that the battery charger is plugged into does not have power
  • Contact your licensed electrician to repair the outlet.

The Toro 39922T LED indicator light on the battery charger is red.

Cause Solution
  • The battery charger and/or battery pack is over or under the appropriate temperature range
  • Unplug the battery charger and move the battery charger and battery pack to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F)

The Toro 39922T LED indicator light on the battery charger is blinking red

Cause Solution
  • There is an error in the communication between the battery pack and the charger
  • Remove the battery pack from the battery charger, unplug the battery charger from the outlet, and wait 10 seconds. Plug the battery charger into the outlet again and place the battery pack on the battery charger. If the LED indicator light on the battery charger is still blinking red, repeat this procedure again. If the LED indicator light on the battery charger is still blinking red after 2 attempts, properly dispose of the battery pack at a battery recycling facility.
  • The battery pack is weak
  • Contact your authorized service dealer if the battery is under warranty, or properly dispose of the battery pack at a battery recycling facility

The Toro 39922T machine is producing a beeping sound.

Cause Solution
  • The battery pack is not charged
  • Remove the battery pack from the machine and charge it.
  • The machine is overloaded
  • Walk at a slower pace while clearing snow.
  • There is another electrical problem with the machine
  • Attempt the other troubleshooting actions, if the alarm still sounds, contact an Authorized Service Dealer

Toro 39922T Replacement Parts

How to Diagnose and Repair a Toro 39922T

This guide will help you identify and resolve issues with your Toro 39922T Snow Blower.

Toro 39922T Issues? Need Help?

Users are encouraged to share their tips or frustrations with their Toro 39922T with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their snow blower and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a Toro 39922T Question

If you're facing a particular issue with your Toro 39922T and need assistance, feel free to ask your question here.

Submit Question

Related Snow Blower Problems