Shark NV26 Series Troubleshooting

The Shark NV26 Series will not run

Solution:

• Check to see if plugged in properly.
• Check circuit breaker/fuse.
• Check the On/Off switch.
• If the vacuum still does not run

The Shark NV26 Series is not picking up dirt

Solution:

• Check the Dust Cup.
• Check the Foam Filters.
• If the Dust Cup and Filter don’t require cleaning, check for blockages,

The Shark NV26 Series pushes scatter rugs (lightweight, movable rugs) on Power Switch position “II – Brush Roll on.”

Solution:

• Move the Power Switch set to position “I – suction only” to disengage the Brush Roll.

The Shark NV26 Series Brush roll does not turn on.

Solution:

• Pull the handle toward you and release the Floor Power Nozzle to disengage the auto-off feature.
• Select Power Switch position “II – Brush Roll on.”
• If the red light is illuminated on the Floor Power Nozzle,

The Shark NV26 Series turns off on its own.

Solution:

• The Motor Thermostat needs to be reset

The Shark NV26 Series Airflow is restricted.

Solution:

• Check for blockages; see Checking for Blockages on the next page.
• Check attachments for suction strength; clear blockages, as required.
• Clean the Dust Cup, Cyclonic Chamber, and Foam Filters