iRobot Roomba 637 Troubleshooting

If you are having problems with your iRobot Roomba 637 Robot Vacuum, you are not alone. Many iRobot Roomba 637 owners experience issues with their robot vacuum from time to time, and it can be frustrating to deal with these problems.

I have problems with my iRobot Roomba 637

Reported iRobot Roomba 637 Issues

The iRobot Roomba 637 1 blink (every 2 seconds)

Error 1. Move Roomba to a new location then press CLEAN to restart

Cause Solution
  • Roomba is stuck with a wheel hanging down
  • Ensure Roomba’s wheels are firmly on the floor. Start Roomba in a new location.

Error 2. Open Roomba’s brush cage and clean brushes.

Cause Solution
  • Roomba’s main brushes cannot turn
  • Remove and clean Roomba’s brushes. See page 19

Error 5. Spin Roomba’s side wheels to clean.

Cause Solution
  • Roomba’s side wheel is stuck
  • Clean hair and debris from Roomba’s side wheels. Push them in and out and confirm that they both turn freely. Start Roomba in a new location

Error 6. Move Roomba to a new location then press CLEAN to restart

Cause Solution
  • Roomba’s cliff sensors are dirty or Roomba is stuck hanging over a cliff.
  • Wipe Roomba’s cliff sensors with a dry cloth. See page 20. Start Roomba in a new location

Error 7. Spin Roomba’s side wheels to clean

Cause Solution
  • Roomba’s side wheel is stuck
  • Clean Roomba’s side wheels of hair and debris. Push them in and out and confirm that they both turn freely. Start Roomba in a new location

Error 9. Tap Roomba’s bumper to clean

Cause Solution
  • Roomba’s bumper is compressed or the bumper sensor is dirty
  • Briskly tap Roomba’s bumper 10-20 times to dislodge any debris that may be trapped under the bumper.

Error 10. Spin Roomba’s side wheels to clean.

Cause Solution
  • Roomba’s side wheel is stuck or its bumper is not registering obstacles
  • If Roomba is circling in place, clean Roomba’s side wheels of hair and debris. Push them in and out and confirm that they both turn. If not circling in place, Roomba may be in an extremely large room. Use a Virtual Wall to create a smaller cleaning area

The iRobot Roomba 637 Please charge Roomba.

Cause Solution
  • Roomba’s battery is discharged
  • Plug Roomba into the power supply (or place Roomba on the Home Base) to charge. See page 11

iRobot Roomba 637 Robot Vacuum Problems

Below are common issues and solutions for the iRobot Roomba 637:

The iRobot Roomba 637 Charging Errors (while charging).

Roomba Blinks… Roomba Displays… Roomba Says… Cause Solution
1 Blink
.
Charging
Error 1
  • Roomba’s battery is not connected.
  • Confirm that Roomba’s battery pull-tab is removed. Remove the bottom cover of Roomba to remove and re-install Roomba’s battery. See page 27.
2 Blinks
Err2
Charging
Error 1
  • Roomba has a charging error.
  • Let Roomba cool down for at least one hour and try charging again
3 Blinks
Err3
Charging
Error 3
  • Roomba has a charging error.
  • Reset Roomba’s software (refer to tip below) and try charging again
5 Blinks
Err5
Charging
Error 5
  • Roomba has a charging error.
  • Reset Roomba’s software (refer to tip below) and try charging again
6 Blinks
Err6
Charging
Error 6
  • Roomba’s battery is too warm

    .

  • Let Roomba cool down for at least one hour and try charging again
7 Blinks
Err7
Charging
Error 7
  • Roomba’s battery is not cooling.
  • Let Roomba cool down for at least one hour and try charging again

iRobot Roomba 637 Replacement Parts

How to Diagnose and Repair a iRobot Roomba 637

This guide will help you identify and resolve issues with your iRobot Roomba 637 Robot Vacuum.

iRobot Roomba 637 Issues? Need Help?

Users are encouraged to share their tips or frustrations with their iRobot Roomba 637 with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their robot vacuum and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a iRobot Roomba 637 Question

If you're facing a particular issue with your iRobot Roomba 637 and need assistance, feel free to ask your question here.

Submit Question

Related Robot Vacuum Problems