Polaris Pool Cleaner Troubleshooting

Polaris pool cleaners are designed to make maintaining your pool a breeze, but they can sometimes run into issues. Whether you’re dealing with a pressure-side cleaner or a high-tech robotic model, it’s crucial to know how to troubleshoot these problems to keep your cleaner running smoothly.

You’ll find this guide invaluable for identifying and fixing common problems with your Polaris pool cleaner. Understanding common issues and knowing how to address them can save you time and ensure your pool remains pristine throughout the season. Whether it’s a simple fix or a more complex issue, having the right troubleshooting knowledge is key.

Check Power Supply Connections

To ensure your Polaris pool cleaner operates correctly, first check the power supply connections. This step is vital as a loose or incorrect connection can prevent the cleaner from working.

Verify that the control unit is securely plugged into a standard 120V power outlet. If the connection isn’t firm, it might cause intermittent power issues.

Next, inspect the power cord connector. Make sure it’s securely inserted into the corresponding socket on the control box. A loose connector can disrupt the power flow to the cleaner.

If you find the connections are secure yet the cleaner still doesn’t start, try plugging another device into the same outlet to confirm the outlet is functioning. Simple steps like these can often resolve power supply issues without needing professional assistance.

Inspect and Clean Filter Bag

To ensure your Polaris pool cleaner functions well, regularly inspect the filter bag. Disconnect the cleaner from the pool system and open the cleaner’s casing to access the filter bag.

Remove the filter bag carefully to avoid spilling debris back into the pool. Empty the contents into a trash bin and rinse the bag with a garden hose to remove fine particles.

Check the filter bag for any signs of wear or damage. If the bag has tears or significant wear, replace it with a new one to maintain optimal cleaning performance. Reattach the filter bag securely before reconnecting the cleaner to the pool system.

Verify Hose Connections

Ensuring the proper connection of the hose is crucial for the efficient operation of your Polaris pool cleaner. Begin by inspecting the hose connections at the quick-disconnect and float hose. Look for any signs of wear, damage, or improper fitting.

Check that all hose sections are securely fastened and don’t show any gaps or loose ends. Loose connections can lead to reduced performance issues or tangling. If you find any damaged sections, replace them promptly to maintain optimal functionality.

Next, ensure that the hose is the correct length for your pool. If the hose is too long or too short, it can cause the cleaner to move inefficiently. Adjust the length as needed, trimming or adding sections according to the manufacturer’s guidelines.

Ensure Proper Wheel Rotation

To keep your Polaris pool cleaner functioning efficiently, you need to check the wheel rotation regularly. Start by lifting the cleaner out of the water and examining the wheels.

Ensure the wheels spin freely without any obstruction. Rotate each wheel individually to see if it moves smoothly.

If a wheel feels stuck or sluggish, inspect it for debris and clean it thoroughly. Sometimes, small pebbles or leaves can get caught, hindering rotation.

Additionally, verify that the axle bearings are not worn out. Replacing worn bearings can help maintain optimal wheel performance.

Lastly, confirm that the drive belts are properly tensioned. Loose belts can affect the wheels’ rotation, reducing the cleaner’s efficiency. Adjust the belts as needed.

Examine Belt for Wear

First, turn off all power sources connected to your Polaris pool cleaner. Safety should always be your priority to avoid accidental startups.

Lift the cleaner out of the water using the hose. Set it down so you can work on it comfortably. Check the drive belt, which is key to the cleaner’s movement.

Inspect the belt closely. Look for any visible signs of wear or damage, such as cracks or frayed edges. If the belt appears worn out or damaged, it’s time to replace it to ensure optimal performance.

Make a note of the belt’s alignment. Misaligned belts can hinder the cleaner’s effectiveness, so ensure it fits properly in its designated track.

Clean Scrubber Brush

Keeping your Polaris pool cleaner’s scrubber brush in good shape is key for optimal performance.

First, check the brush for any debris or algae. Gently remove any build-up using a soft-bristle brush or your hand. It’s important to do this regularly to prevent clogging and ensure smooth operation.

Next, inspect the brush wear indicator line. If the bristles are worn down past this line, it’s time to replace the brush. Doing this ensures the cleaner can effectively scrub your pool surfaces.

Keep your scrubber brush clean and in good condition to maintain your Polaris pool cleaner’s efficiency. Regular maintenance extends the life of both your brush and cleaner, saving you time and money in the long run.

Check Water Flow/Pressure

To ensure your Polaris pool cleaner works efficiently, first verify the water flow and pressure. Start by checking if the pressure relief valve is releasing water. If not, you might need to clean or backwash the pool filter.

Examine the filter screen in the quick disconnect. A clogged filter screen can reduce water flow, so make sure it’s clean.

Inspect all hoses, connections, and swivels for any signs of leaks. Leaks can significantly drop the pressure needed for your cleaner to function correctly. Repair or replace any damaged parts to maintain proper pressure levels.

Inspect Back-Up Valve

To check the back-up valve of your Polaris pool cleaner, lift it out of the water and see if it cycles on and off every three minutes. If the valve doesn’t cycle correctly, it might need replacing.

Ensure the hose float is right behind the valve. A misplaced float can affect valve function. Keep an eye out for water shooting out, which indicates an internal issue needing inspection.

Examine Pump Motor

Start by turning off the power supply to avoid any electrical hazards. Carefully inspect the motor for visible signs of wear or damage. Look for burned wires or corrosion around the terminals.

Check the motor bearings by slowly rotating the motor shaft. Listen for unusual noises or feel for resistance. If the bearings are worn, you’ll need to replace them.

Inspect the impeller and diffuser. Ensure there are no cracks or obstructions that might hinder performance. Clean any debris that you find.

Use a multimeter to check the motor windings for continuity. This helps determine if the motor windings are intact or need replacement.

Clear Debris from Impeller

To clear debris from the impeller of your Polaris pool cleaner, first, ensure the pump is off. This will prevent any accidental activations while you’re working.

Next, remove the lid of the pump basket. Take out the pump basket to access the impeller. Depending on the model, you might need a screwdriver to unscrew the housing cover.

Once exposed, inspect the impeller for any visible debris such as leaves, twigs, or other small particles. Gently remove these using your fingers or a soft tool like a brush.

After clearing the impeller, replace the pump basket and secure the lid back in place. Ensure everything is properly tightened to prevent leaks when you turn the pump back on.

Finally, turn the pump back on and check for normal operation. If the cleaner still struggles, there might be additional issues to address.

Common Polaris Pool Cleaner Problems

Movement Issues

Mechanical Issues

Performance Issues

Operational Issues

Polaris Pool Cleaner Movement Issues

Why Is My Polaris Pool Cleaner Not Moving?

First, check the wheel RPMs. They should be between 28-32 RPMs. If they are not, adjust the wheel RPMs accordingly. Next, check the filter and clean it if necessary. Also, check the hoses for any kinks or tangles and straighten them out if needed.

Why Won’t My Polaris Pool Cleaner Move?

If your cleaner won’t move, check the filter, hoses, and wheel RPMs as mentioned above. If those are all okay, check the booster pump to make sure it is working properly. If the booster pump is not working, the cleaner will not move.

Why Has My Polaris Pool Cleaner Stopped Moving?

If your cleaner was moving but has stopped, check the filter, hoses, and wheel RPMs. If those are all okay, check the backup valve. If the backup valve is not working properly, the cleaner may stop moving.

Why Is My Polaris Pool Cleaner Going In Circles?

If your cleaner is going in circles, check the wheel RPMs and adjust them if necessary. Also, check the filter and hoses for any kinks or tangles. If those are all okay, check the backup valve to make sure it is working properly.

Why Does My Polaris Pool Cleaner Keep Getting Stuck?

If your cleaner keeps getting stuck, check the hoses for any kinks or tangles and straighten them out if needed. Also, check the backup valve to make sure it is working properly. If the cleaner is still getting stuck, adjust the tail to make sure it is not too high or too low.

Why Does My Polaris Pool Cleaner Get Stuck In Corners?

If your cleaner gets stuck in corners, check the backup valve to make sure it is working properly. Also, adjust the tail to make sure it is not too high or too low. If the cleaner is still getting stuck, adjust the hose length to make sure it is not too long.

Why Is My Polaris Pool Cleaner Hose Tangling And Kinking?

If your cleaner hose is tangling and kinking, check the hose length and adjust it if necessary. Also, add a swivel to the hose to help it turn more easily. Finally, check the backup valve to make sure it is working properly.

Polaris Pool Cleaner Mechanical Issues

Why Are My Polaris Pool Cleaner’s Wheels Not Turning?

If your Polaris pool cleaner’s wheels are not turning, there could be a few different issues causing the problem. First, check to make sure that the wheel bearings are not worn or damaged. If they are, they will need to be replaced. Additionally, check to make sure that the wheel RPM is set correctly. If it is set too low, the wheels may not turn properly.

Why Is My Polaris Pool Cleaner Tail Not Moving?

If your Polaris pool cleaner’s tail is not moving, there could be a few different issues causing the problem. First, check to make sure that the tail is not clogged with debris. If it is, clean it out and try again. Additionally, check to make sure that the tail is properly adjusted. If it is not, adjust it accordingly.

Why Does My Polaris Pool Cleaner Have No Power?

If your Polaris pool cleaner has no power, there could be a few different issues causing the problem. First, check to make sure that the booster pump is running properly. If it is not, the Polaris pool cleaner will not have enough power to operate. Additionally, check to make sure that the filter and pump are clean and working properly.

Why Is My Polaris Pool Cleaner’s Lights Flashing?

If your Polaris pool cleaner’s lights are flashing, there could be a few different issues causing the problem. First, check to make sure that the power source is working properly. If it is not, the lights may not function properly. Additionally, check to make sure that the control unit is properly plugged in and connected to the Polaris pool cleaner.

Polaris Pool Cleaner Performance Issues

Why Is My Polaris Pool Cleaner Not Cleaning?

If your Polaris pool cleaner is not cleaning your pool properly, it could be due to a clogged filter bag or debris in the cleaner’s hoses. Check the filter bag and hoses for any blockages and clean them if necessary. Additionally, make sure that the cleaner’s hose length is correct for your pool size and that the tail sweep is adjusted properly to move debris around.

Why Is My Polaris Pool Cleaner Moving Slowly?

If your Polaris pool cleaner is moving slowly, it could be due to low water pressure or a clogged filter bag. Check the water pressure and make sure that the filter bag is clean. Also, make sure that the backup valve is functioning properly and that the hose length is correct for your pool size.

Why Is My Polaris Pool Cleaner Not Climbing Walls?

If your Polaris pool cleaner is not climbing walls, it could be due to a worn-out wheel or a broken drive belt. Check the wheels and drive belt and replace them if necessary. Additionally, make sure that the hose length is correct for your pool size and that the tail sweep is adjusted properly to move the cleaner around.

Why Is My Polaris Pool Cleaner Not Picking Up Debris?

If your Polaris pool cleaner is not picking up debris, it could be due to a clogged filter bag or a worn-out wheel. Check the filter bag and clean it if necessary. Also, check the wheels and replace them if they are worn out. Additionally, make sure that the hose length is correct for your pool size and that the tail sweep is adjusted properly to move debris around.

Why Is My Polaris Pool Cleaner Not Staying On The Bottom?

If your Polaris pool cleaner is not staying on the bottom of your pool, it could be due to a worn-out wheel or a broken drive belt. Check the wheels and drive belt and replace them if necessary. Additionally, make sure that the hose length is correct for your pool size and that the tail sweep is adjusted properly to move the cleaner around.

Polaris Pool Cleaner Operational Issues

Why Won’t My Polaris Pool Cleaner Turn On?

If your Polaris pool cleaner won’t turn on, the first thing to check is the power source. Make sure that the booster pump is running and that it is timed to run when the pool pump is running. If the booster pump is not running, check the circuit breaker and make sure it is not tripped. If the circuit breaker is not tripped, it may be an issue with the booster pump itself and it may need to be replaced.

Why Is My Polaris Pool Cleaner Running On Its Side?

If your Polaris pool cleaner is running on its side, it could be due to a few different reasons. First, check the rear float. If it is cracked and filled with water, it will cause the cleaner to sink. Replace the rear float if necessary. Another possible reason is that the hose length is too long, causing the cleaner to tilt to one side. Adjust the hose length to the appropriate size for your pool.

Why Is My Polaris Pool Cleaner Floating?

If your Polaris pool cleaner is floating, it could be due to a few different reasons. First, check the filter bag. If it is full, it will cause the cleaner to float. Remove and empty the filter bag. Another possible reason is that the hose length is too short, causing the cleaner to float to the surface. Adjust the hose length to the appropriate size for your pool.

Why Is My Polaris Pool Cleaner On Its Side?

If your Polaris pool cleaner is on its side, it could be due to a few different reasons. First, check the rear float. If it is cracked and filled with water, it will cause the cleaner to sink. Replace the rear float if necessary. Another possible reason is that the hose length is too long, causing the cleaner to tilt to one side. Adjust the hose length to the appropriate size for your pool.

Avatar Comment
Pool Cleaner > Polaris Pool > Polaris 9650Iq

Controller turns on, but display is frozen.

Buttons don’t respond.

Author: David Stirrup
Date: July 23, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

I just go this and have only run this about 5 times and have cleaned the filter each time. When I put the cleaner in water now. It starts and moves a few feet and stops. This should not be happening on a new cleaner.. 😢
Author: RAVEN ANDREWS
Date: July 22, 2024
Pool Cleaner > Polaris Pool > Polaris 9550 Sport

Polaris 9550 sport
Left wheels don’t turn, Polaris goes in circles. No error codes
Author: Gary Schake
Date: July 22, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

I just purchased my Polaris Freedom on Thursday. Today is Sunday, I have used it 3 times. Each time, it left dirt and sand in the pool, stopped in the deep end and ran out of a charge although it was fully charged each time. The app did not even notify me that the cycle was complete. I am extremely disappointed. Considering the price, I expected a far, far better experience. Unfortunatlely, the pool store I purchased it from considers it final sale. I would like to return it if possible.
Author: Mary Kolkhorst
Date: July 21, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

Won’t charge after having the cleaner only two weeks. Error code 25
Author: Kevin Visconti
Date: July 20, 2024
Pool Cleaner > Polaris Pool > Polaris 8050 Sport

All lights on Power supply are on and stay on. Will not change status so is not working. Any ideas on what’s going on and how to resolve ?
Author: Nader Mortazavi
Date: July 20, 2024
Pool Cleaner > Polaris Pool > Polaris 9450 Sport

The control panel goes black when I push the start button.
Have to unplug it for a couple of minutes then the control panel will light up again but instantly go black when I press the start button.
HELP
Author: Vin
Date: July 20, 2024
Pool Cleaner > Polaris Pool > Polaris P70

I CANT GET LID TO SNAP INTO PLACE. I HATE THIS ROBOT. NOT WORTH 600$..
Author: Patricia Caminiti
Date: July 19, 2024
Pool Cleaner > Polaris Pool > Polaris P825

The unit pump comes on but the unit will not move? Thanks
Author: Chris Bentley
Date: July 19, 2024
Pool Cleaner > Polaris Pool > Polaris 9650Iq

Has anyone had an issue with the control screen not turning on? I know the outlets work as they are fine for other devices but the control box just stopped working. It will occasionally turn on and then will go off after a few minutes.
Author: Ben Homeyer
Date: July 16, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8640

I am having the same issue. It is 2 year old so definitely not time for a new one. Have you found a fix?
Author: Jessica Crawford
Date: July 16, 2024
Pool Cleaner > Polaris Pool > Polaris 9550 Sport

I HAVE A POLARIS 9550 SPORT POOL CLEANER AND I START IT UP AND IT RUNS SEVERAL MINUTES THEN THROWS ER10 CODE, CONNECTION PINS ARE CLEAN AT HEAD UNIT AND SCREWED ON SECURLEY, IMPELLOR IS CLEAN, BASKET IS CLEAN ANY HELP WOULD BE APPRECIATED-THANKS.
Author: Jerry W Barker
Date: July 14, 2024
Pool Cleaner > Polaris Pool > Polaris P825

we bought a polaris P825 in 2018, it lasted about 2 years 3 months… and it was stored indoors while not in use for 6 months out of the year. We live in Ct. so the pool is only open about 5 months out of the year… When problems started, At first it would run for about 10 minutes and shut off… I would clean it, make sure there were no bubbles coming from the unit. ect. I brought it to Leslies pool supply where it was purchased new, they tested complete unit, I was told it needed a new control module for about $600.. Found a used P825 that the robot was in tough shape, but control module was good… for $100… it waqs used about three weeks for about 2 hours a day, and now this module is crapped out… Total friggin junk… NEVER BUY A Polaris pool cleaner!
Author: Preston F Symonds
Date: July 14, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8640

Same problem here. I have not seen a proposed solution in this thread. Any word from anyone?
Author: James
Date: July 13, 2024
Pool Cleaner > Polaris Pool > Polaris 8050 Sport

Hello, red light flashes turns on but stops about 20 seconds later does anyone have any ideas?
Author: Eddie Arrozogaray
Date: July 13, 2024
Pool Cleaner > Polaris Pool > Polaris P70

Runs great
Doesn’t pick up debris.
Runs right over it..
Can’t figure out how to get to the impeller. Basket is clean. This cleaner is almost brand new.
Author: Art Waters
Date: July 13, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8640

It won’t let me select the mode to clean sides of pool. will only do mode that cleans the bottom only.
Author: reneé
Date: July 12, 2024
Pool Cleaner > Polaris Pool > Polaris Vrx iQ+

My robot is not turning on
Author: Sally Bittner
Date: July 10, 2024
Pool Cleaner > Polaris Pool > Polaris P825

The Unit will not turn on at all- I checked the power and it is live but nothing happens. No error, codes, no lights, absolutely nothing happens. Thank You
Author: Bob Kroha
Date: July 10, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

I have had mine for a year or so and noticed the flowkeeper value keeps opening on start up. I’m wondering if the flow rate keeps changing.
Author: Chris
Date: July 7, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8640

Our Polaris EPIC 8640 turns on when plugged in and then immediately shuts off. I have checked all the connections as well as all of the forums. Has anyone else had this issue and may know what the solution is? Used first in the summer of 2023.
Author: Jennifer Brown-Kolk
Date: July 7, 2024
Pool Cleaner > Polaris Pool > Polaris Alpha Iq

Shows auto code on display and Bluetooth light is flashing?

Why?

Author: Steve
Date: July 7, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8520

It’s just mainly spinning
Author: Michael
Date: July 6, 2024
Pool Cleaner > Polaris Pool > Polaris 380

I have a new Polaris 380 and the debris bag comes off after 5 minutes or less. I’m ready to take it back. The catch for the bag is flimsy and doesn’t hold. Poor design or quality control.
Author: Stephen
Date: July 4, 2024
Pool Cleaner > Polaris Pool > Polaris 8050 Sport

RE: Polaris 8050 – flashing red light, will not moved – tried all the suggestions on line, none of them worked. The wheels don’t move, tried turning them, they will not budge. Help please!
Author: Gene Quondamatteo
Date: July 3, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

I have the same problem. Worthless cleaner
Author: Robert Mifflin
Date: July 3, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

So I have machine for 2 weeks .. now it’s blinking red 4 times .. it says clean charger plates I have 100 times and still doesn’t work
Author: Amy
Date: June 25, 2024
Pool Cleaner > Polaris Pool > Polaris 8050 Sport

It is making a clicking noise
Author: Shirley Hsll
Date: June 24, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

I have the same issue. Did you get this problem resolved?
Author: Rene
Date: June 24, 2024
Pool Cleaner > Polaris Pool > Polaris Vrx iQ+

I have a Polaris Vrx IQ+ that needs to have the swivel cable replaced. The recommended replacement cable, (PTS-R0726700) has a single connector. When I took the Polaris cleaner apart to replace the swivel cable, it actually has a splitter and has two connections inside the shell. Did Polaris change swivel cables in the last few years? My Polaris Vrx IQ is 3 years old. Thank you.
Author: SMG
Date: June 22, 2024
Pool Cleaner > Polaris Pool > Polaris P70

I can’t keep the cord from knotting up and I’ve laid it in the sun I have to straighten at least twice a day and that’s a pain in the hind end would cleaner clips help ?
Author: John Meister
Date: June 22, 2024
Pool Cleaner > Polaris Pool > Polaris Vrx iQ

Same thing with ours there is power and it will not do anything
Author: Stephanie
Date: June 20, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

I’m having same issue with the unit spending more time spinning than going straight. Did you find a resolution? Brand new unit.
Author: Tom
Date: June 18, 2024
Pool Cleaner > Polaris Pool > Polaris Epic 8640

My Polaris Epic 8650 has been working great and was working yesterday afternoon.
The unit is plugged in and clean – the unit will not start working. We have unplugged the control
unit and waited a couple minutes and plugged it back in and still not working. tried unplugging the comm connection and plugged it back in – not working.
Any help would be greatly appreciated. The is the start of our second season.
Author: Tom Harvey
Date: June 18, 2024
Pool Cleaner > Polaris Pool > Polaris 9550 Sport

Polaris 9550 Sport began stopping, giving a code 03 Error. I’m googling but only get info on code 10.
Can you please advise what does the Error code 03 mean and how do I fix it?

Thank you.

Author: Joseph
Date: June 17, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

My Polaris freedom will not turn on after charging . The battery light was flashing red all the time. I finally got it to flash green after cleaning the charging plates, but now after I take it off the charger, it will not turn on. The charger stand is solid green light.
Author: Melissa DeFrancesco
Date: June 16, 2024
Pool Cleaner > Polaris Pool > Polaris P70

Same issue here
Author: Jon
Date: June 16, 2024
Pool Cleaner > Polaris Pool > Polaris Freedom

Polaris Freedom cleaner will not pair
Author: Bear
Date: June 14, 2024
Pool Cleaner > Polaris Pool > Polaris 8050 Sport

My control panel lights up when first plugged in and then will not do anything after that can’t power up.
Author: Jason Trujillo
Date: June 13, 2024
Pool Cleaner > Polaris Pool > Polaris P70

Hello there! Mine is doing the same
Did you ever get a response?
Thank you in advance
Author: Cynthia
Date: June 9, 2024
Pool Cleaner > Polaris Pool > Polaris P70

Turns on moves for a second and then stops
Author: Cynthia
Date: June 9, 2024
Pool Cleaner > Polaris Pool > Polaris Turbo Turtle

My Polaris turtle moves backwards but does not move forward. Can you offer any suggestions?
Author: D Hogan
Date: June 9, 2024
Pool Cleaner > Polaris Pool > Polaris Vrx iQ+

I just had this issue mine is only 2 weeks old. Did you get any solutions? Or just needed a new one?
Author: Karen Gerber
Date: June 7, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

My sweep has stopped moving. I checked the engine no debris. The tread is good one wheel turns very freely. One wheel doesn’t.
I need help. I’m very upset.
Author: Richelle
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

Same problem did you get a reply? An answer?!!!!!
Any answer????
Author: Richelle
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

Same problem did you get a reply? An answer?!!!!!
Author: Richelle
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

Same !!!!
Author: Richelle
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

Did anyone get an answer?? Same problem here
Author: Richelle
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

I’m having the same issue!!
Did anyone answer you? Or all the others! Mine is just sitting in the bottom of the pool also!
Author: Richelle varni
Date: June 6, 2024
Pool Cleaner > Polaris Pool > Polaris Maxx

Pool cleaner will no longer climb walls. I worked fine last year
Author: Dan
Date: June 3, 2024

1 thought on “Polaris Pool Cleaner”

Leave a Comment

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here