Dyson V6 Absolute Troubleshooting

If you are having problems with your Dyson V6 Absolute Vacuum Cleaner, you are not alone. Many Dyson V6 Absolute owners experience issues with their vacuum cleaner from time to time, and it can be frustrating to deal with these problems.

I have problems with my Dyson V6 Absolute

Dyson V6 Absolute Vacuum Cleaner Problems

Below are common issues and solutions for the Dyson V6 Absolute:

The Dyson V6 Absolute Emptying the clear bin

Caution:

  • Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
  • Ensure the machine is disconnected from the charger before emptying the clear bin. Be careful not to pull the ‘ON’ trigger.
  • To make emptying the clear bin easier, it is advisable to remove the wand and floor tool.
  • To release the dirt, push the red button by the clear bin. Press once to open the bin base. Press a second time to release the clear bin from the main body of the machine.
  • To minimize dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.
  • Remove the clear bin carefully from the bag.
  • Seal the bag tightly, and dispose as normal.
  • Close the clear bin base so it clicks into place and is secure

The Dyson V6 Absolute Cleaning the clear bin

Caution:

  • Ensure the machine is disconnected from the charger before removing the clear bin. Be careful not to pull the ‘ON’ trigger.
  • Push the red button by the clear bin. Press once to open the bin base. Press a second time to release the clear bin from the main body of the machine.
  • Remove the clear bin carefully.
  • Clean the clear bin with a damp cloth only.
  • Do not use detergents, polishes, or air fresheners to clean the clear bin.
  • Do not put the clear bin in a dishwasher.
  • Clean the cyclone shroud with the brush on the combination tool to remove lint and dust.
  • Ensure the clear bin is completely dry before replacing it.
  • To replace the clear bin, push the clear bin up and into the main body of the machine. It will click into place.
  • Close the clear bin base so it clicks into place and is secure.

The Dyson V6 Absolute washing filter

Caution:

  • Ensure the machine is disconnected from the charger before removing the filter. Be careful not to pull the ‘ON’ trigger.
  • Your machine has one washable filter, located as shown.
  • To remove the filter, lift it out of the top of the machine.
  • Check and wash the filter regularly according to instructions to maintain performance.
  • The filter may require more frequent washing if vacuuming fine dust or if used mainly in ‘HIGH CONSTANT SUCTION’ mode.
  • Wash the filter with cold water only.
  • Run water over the outside of the filter until the water runs clear.
  • Squeeze and twist with both hands to make sure the excess water is removed.
  • Lay the filter on its side to dry. Leave to dry completely for a minimum of 24 hours.
  • Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave, or near an open flame.
  • To refit, place the dry filter back into the top of the machine. Make sure it is seated properly.
  • To watch a short online video visit: www.dyson.com/dc58filterwash

The Dyson V6 Absolute Looking for blockages

Caution:

  • Ensure the machine is disconnected from the charger before looking for blockages. Be careful not to pull the ‘ON’ trigger.
  • Do not operate while checking for blockages as doing so could result in personal injury
  • Beware of sharp objects when checking for blockages.
  • Refit all parts securely before using.
  • Clearing blockages is not covered by your warranty

The Dyson V6 Absolute Blockages – Thermal Cut-Out

Caution:

  • This machine is fitted with an automatically resetting thermal cut-out.
  • Large items may block the tools or nozzle. If any part becomes blocked the machine may overheat and automatically cut out.
  • Leave to cool down for 1-2 hours before checking the filter or for blockages.
  • Ensure the machine is disconnected from the charger before looking for blockages. Failure to do so could result in personal injury.
  • Clear any blockage before restarting.
  • Refit all parts securely before using.
  • Clearing blockages is not covered by your warranty.

The Dyson V6 Absolute Diagnostic – Main Body

When in use, trigger pressed:

  • Solid blue: Boost ‘ON’
  • Light off: Powerful suction
  • Flashing blue: Low battery warning
  • Fast flashing blue: No power, temporary fault (e.g. check filter or for blockages)

The Dyson V6 Absolute Diagnostic – Battery

When in use, trigger pressed:

  • Solid blue: ‘ON’
  • Flashing blue: No power, charge battery.
  • Flashing amber: No power, temporary fault (e.g. too hot/cold).
  • Solid amber: Fault, if persists contact Dyson helpline.
  • Flashing red: Fault (contact Dyson helpline).

Dyson V6 Absolute Replacement Parts

How to Diagnose and Repair a Dyson V6 Absolute

This guide will help you identify and resolve issues with your Dyson V6 Absolute Vacuum Cleaner.

Dyson V6 Absolute Issues? Need Help?

Users are encouraged to share their tips or frustrations with their Dyson V6 Absolute with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their vacuum cleaner and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a Dyson V6 Absolute Question

If you're facing a particular issue with your Dyson V6 Absolute and need assistance, feel free to ask your question here.

Submit Question

Related Vacuum Cleaner Problems