The Dyson V11 Animal Emptying The Clear Bin
Caution:
- Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
- Be careful not to pull the ‘ON’ trigger while the clear bin is open for emptying.
- Remove the wand by pressing the red wand release button and pulling away from the bin.
- To release the dirt:
– Hold the machine with the bin in a downward position.
– Firmly push the red bin release button.
– The bin will slide down, cleaning the shroud as it goes.
– The bin base will then open.
– The bin base will not open if the red button is not pushed down fully.
To minimize dust/allergen contact when emptying, encase the clear bin tightly in a dust-proof bag and empty it. Remove the clear bin carefully from the bag. Seal the bag tightly, and dispose as normal
The Dyson V11 Animal Cleaning the clear bin (optional)
Caution:
- If it is necessary to clean the clear bin:
- Follow the instructions in the ‘Emptying the clear bin’ section.
- Press the red button located on the bin runner to release the bin and slide the bin off the runner.
- Clean the clear bin with a damp cloth only.
- Ensure that the clear bin and seals are completely dry before replacing them.
To refit the clear bin:
– Insert the spine onto the bin runner.
– Close the clear bin by pushing the bin base upwards until the clear bin and bin base click into place.
- The clear bin is not dishwasher safe and the use of detergents, polishes, or air fresheners to
clean the clear bin is not recommended as this may damage your machine
The Dyson V11 Animal Filter and blockage indicator LEDS
Caution:
- The display of your machine will alert you when simple maintenance steps are needed.
- The filter indicator will show when the filter unit is not fitted correctly. Follow the instructions on how to refit the filter unit in the ‘Washing the filter unit’ section.
- The filter indicator will show when the filter unit needs washing. Follow the instructions on how to wash the filter unit in the ‘Washing the filter unit’ section.
- The blockage indicator will show if there is a blockage. Follow the instructions on how to clear blockages in the ‘Looking for blockages’ section.
The Dyson V11 Animal washing the filter unit
Caution:
- Wash the filter unit at least once every month, or whenever the filter maintenance indicator lights.
- Check and wash the filter unit, according to the instructions, to maintain performance.
- Remove the filter unit by twisting it counterclockwise. Gently pull away from the machine.
- Gently tap the filter unit to remove any excess dust and debris before washing it.
- Wash the filter unit in cold water only: do not use detergent, or wash it in a dishwasher or washing machine.
- Wash the pleated paper element of the filter unit first; hold the filter unit under a cold water tap with the foam element downwards and run cold water over the pleated paper.
- Continue washing until the water runs clear.
- Wash the foam element of the filter unit next; hold the filter unit under a cold water tap with the foam element downwards so that dirty water does not contaminate the pleated paper element. Run cold water over the inside and outside of the foam element and squeeze the foam gently to expel the dirt.
- Continue washing until the water runs clear.
- Wash the outside of the filter unit. Then fill the unit with cold water, place your hands over the open ends, and shake gently.
- Repeat washing the elements and outside of the filter unit until the water runs clear.
- Gently shake the filter unit to remove any excess water and leave it to drain with the foam element end facing up.
- Leave the filter unit to dry completely in a dry environment with good airflow, for a minimum of 24 hours.
- Check that the filter unit is completely dry.
- To refit, return the filter unit to the main body and twist it clockwise until it clicks into place.
- The filter unit may require more frequent washing if vacuuming fine dust or if use is mainly in Boost mode.
- Do not put any part of your machine in a dishwasher, washing machine, tumble dryer, oven, microwave, or near a naked flame.
The Dyson V11 Animal high torque cleaner head
Caution:
- The brush bar of a motorized cleaner head is not washable
The Dyson V11 Animal quick-release mini motorhead tool
Caution:
- The brush bar of a motorized cleaner head is not washable.
The Dyson V11 Animal blockages – automatic cut-out
Caution:
- This machine is fitted with an automatic cut-out.
- If any part becomes blocked, the machine may automatically cut out.
- This will happen after the motor pulses a number of times (i.e. switches on and off in quick succession) and the blockage indicator will light.
- Leave to cool down before looking for blockages.
- Be careful not to pull the ‘ON’ trigger while looking for blockages. Operating the machine while it is partially dismantled could result in personal injury.
- Clear any blockage before restarting.
- Refit all parts securely before using.
- Clearing blockages is not covered by your warranty
The Dyson V11 Animal looking for blockages
Caution:
- The motor will pulse and the blockage indicator will show when there is a blockage. Please follow the instructions below to locate the blockage:
- Be careful not to pull the ‘ON’ trigger while looking for blockages. Operating the machine while it is partially dismantled could result in personal injury.
- Beware of sharp objects when checking for blockages.
- To check for blockages in the main body of the machine, remove the clear bin following the instructions in the ‘Cleaning the clear bin’ section and remove the blockage.
- If you cannot clear an obstruction from the cleaner head, you may need to remove the brush bar. Use a coin to unlock the fastener, slide the brush bar out of the cleaner head, and remove the obstruction. Replace the brush bar and secure it by tightening the fastener. Ensure it is fixed firmly before operating the machine.
- This machine has carbon fiber brushes. Take care if coming into contact with them, as they may cause minor skin irritation. Wash your hands after handling the brushes.
- Refit all parts securely before using.
- Clearing blockages is not covered by your warranty
