The Dyson DC18 Slim Emptying the Clear bin
Caution:
- Turn the power off and unplug before emptying the bin. Failure to do so could result in electric shock or personal injury.
- Empty as soon as the dirt reaches the level of the max mark – do not overfill.
- Do not use the machine without the clear binTM in place
The Dyson DC18 Slim Cleaning the Clear bin
Caution:
- Do not use detergents, polishes, or air fresheners to clean the clear bin
- Do not immerse the whole cyclone in water.
- Do not put the bin in the dishwasher.
- Ensure the bin is completely dry before replacing it.
- To clean the shroud (if necessary), be sure the bin has been emptied and the bin base is open. Separate the clear binTM and clean the shroud with a cloth or small brush to remove lint and dust
The Dyson DC18 Slim Washing your filter
Caution:
- Check your filter regularly and wash at least every 3-6 months according to instructions to maintain performance.
- The filter may require more frequent washing based on individual vacuuming habits. Check regularly.
- Turn the power off and unplug before washing the filter. Failure to do so could result in electric shock or personal injury.
- The filter may require more frequent washing if vacuuming fine dust.
- Do not use detergent to clean the filter.
- Do not put the filter in the dishwasher, washing machine, clothes dryer, microwave, or near an open flame.
- Air dry for at least 12 hours and ensure filter and case are completely dry before refitting onto the machine
The Dyson DC18 Slim Clearing blockages/brushbar
Caution:
- Please note: clearing blockages is not covered by your machine’s limited warranty.
- Turn the power off and unplug it before checking for blockages. Failure to do so could result in electric shock or personal injury.
- If any part of your machine becomes blocked, it may overheat and then automatically shut off. Unplug the machine and leave it to cool down. Clear blockage before restarting.
- If the brushbar becomes obstructed, turn the power off and unplug it before checking for blockages. Remove the blockage and press the RESET button located on the top of the cleaner head before restarting the vacuum.
- Please ensure the machine is upright before removing the hose or airway inspection ports.
- Beware of sharp objects when clearing blockages.
- Refit all parts of the machine securely before using it