If you are having problems with your Dolphin T35 Pool Cleaner, you are not alone. Many Dolphin T35 owners experience issues with their pool cleaner from time to time, and it can be frustrating to deal with these problems.
The Dolphin T35 power-supply or its switch led are not working.
Cause
Solution
No voltage in the power socket in the wall.
The power supply is not switched ON.
The power cable is not well connected
into the power supply inlet.
Check that there is voltage in the power socket in the wall.
Check that the power supply is plugged in and turned ON.
Check that the power cable is securely connected all the way into the power supply.
Turn the power supply off. Wait 30 seconds then turn it back on
The Dolphin T35 Pool Cleaner does not move.
Cause
Solution
The floating cable is not well connected
into the power supply outlet.
An obstacle blocks the impeller, tracks or wheels
Check that the floating cable is securely connected all the way into the power supply.
Unplug the power supply. Open the impeller cover and check that nothing is trapped in the impeller. Verify that nothing blocks the tracks or wheels.
The Dolphin T35 Pool Cleaner is moving in circles.
Cause
Solution
Clogged filter basket/canister.
Debris stuck in the impeller-house or
impeller-cover.
Power supply incorrectly positioned.
Algae or pool water is out of Spec.
Clean the filter basket/canister.
Remove debris stuck in the impeller-house or impeller-cover (according to the drawings).
Place power supply in a position so that the Pool Cleaner can freely reach all the pool area.
Correct pool and water conditions
The Dolphin T35 Pool Cleaner does not turn or moves in one direction only
Cause
Solution
Debris stuck in the impeller-house
or impeller-cover.
Remove debris stuck in the impeller-house or impeller-cover (according to the drawings).
The Dolphin T35 Pool Cleaner moves but does not clean the pool.
Cause
Solution
Clogged filter basket.
Debris stuck in the impeller-house
or impeller-cover.
Clean the filter basket.
Remove debris stuck in the impeller-house or impeller-cover (according to the drawings).
The Dolphin T35 Pool Cleaner cleans only part of the pool.
Cause
Solution
Power supply incorrectly positioned.
Not enough floating is released for the
correct operation of the Pool Cleaner.
Place the power supply in a position so that the Pool Cleaner
can freely reach all the pool area.
Check that there is enough slack in the floating cable for the Pool Cleaner to reach all of the pool.
Clean the filter basket
The Dolphin T35 floating cable has kinks.
Cause
Solution
Clogged filter basket
Debris stuck in the impeller-house or
impeller-cover.
Clean the filter basket
Remove debris stuck in the impeller-house or impeller-cover (according to the drawings).
To remove the kinks, stretch the floating cable out completely and let it sit for at least a day in the sun.
The Dolphin T35 Pool Cleaner doesn’t climb the walls.
Cause
Solution
Clogged filter basket
Algae on walls.
Unsuitable pH level.
Debris stuck in the impeller-house or
impeller-cover.
Clean the filter basket
Check the level of the chemicals of the water. Improper levels may allow the growth of algae making the walls slippery. If so, adjust the levels and scrub the walls.
Remove debris stuck in the impeller-house or impeller-cover (according to the drawings).
Share your Dolphin T35 Pool Cleaner Problems, issues , tips, ideas, and frustrations with other owners.
John
T35 1 yr old…2 lights in center of console which control cleaning mode(s) won’t illuminate nor change action of T35..
Have unplugged it and it blinks as if reseting. Nuthin’.
Only cleans in full mode.
That’s all I got.
Thanks
T35 1 yr old…2 lights in center of console which control cleaning mode(s) won’t illuminate nor change action of T35..
Have unplugged it and it blinks as if reseting. Nuthin’.
Only cleans in full mode.
That’s all I got.
Thanks