Dolphin Explorer E30 Troubleshooting

If you are having problems with your Dolphin Explorer E30 Pool Cleaner, you are not alone. Many Dolphin Explorer E30 owners experience issues with their pool cleaner from time to time, and it can be frustrating to deal with these problems.

I have problems with my Dolphin Explorer E30

What to do if your Dolphin Explorer E30 is not working?

If your Dolphin Explorer E30 pool cleaner is not working, start by ensuring that there is voltage in the power socket in the wall. Check that the power supply is plugged in and turned ON, and that the power cable is securely connected into the power supply inlet. If the power supply or its switch LED are still not operational after these checks, turn the power supply off, wait 30 seconds, and then turn it back on.

Should the Dolphin Explorer E30 still not move or if it is moving in circles, ensure that the floating cable is securely connected into the power supply. If the cleaner is in the water but not moving, unplug the power supply, open the impeller cover, and check that nothing is trapped in the impeller or blocking the tracks or wheels. Also, make sure the power supply is positioned correctly so that the pool cleaner can freely reach all areas of the pool and that there is enough slack in the floating cable.

Following these troubleshooting steps should help resolve most issues with the Dolphin Explorer E30 pool cleaner. If the problem persists, consult the user manual or contact customer support for further assistance.

Related Products

Dolphin Explorer E30 Pool Cleaner Problems

Below are common issues and solutions for the Dolphin Explorer E30:

The Dolphin Explorer E30 power-supply or its switch led are not working.

Cause Solution
  • No voltage in the power socket in the wall.
  • The power supply is not switched ON.
  • The power cable is not well connected into the power supply inlet.
  • Check that there is voltage in the power socket in the wall.
  • Check that the power supply is plugged in and turned ON.
  • Check that the power cable is securely connected all the way into the power supply.
  • Turn the power supply off. Wait 30 seconds then turn it back on

The Dolphin Explorer E30 Pool Cleaner does not move.

Cause Solution
  • The floating cable is not well connected into the power supply outlet.
  • An obstacle blocks the impeller, tracks or wheels.
  • Check that the floating cable is securely connected all the way into the power supply.
  • Unplug the power supply. Open the impeller cover and check that nothing is trapped in the impeller. Verify that nothing blocks the tracks or wheels.

The Dolphin Explorer E30 Pool Cleaner is moving in circles.

Cause Solution
  • Clogged filter basket.
  • Debris stuck in the impeller house or impeller cover.
  • Power supply incorrectly positioned.
  • Algae or pool water is out of spec.
  • Clean the filter basket.
  • Remove debris stuck in the impeller house or impeller cover
  • Place power supply in position so that the Pool Cleaner can freely reach all the pool area.
  • Correct pool and water conditions.

The Dolphin Explorer E30 Pool Cleaner does not turn or moves in one direction only.

Cause Solution
  • Debris stuck in the impeller house or impeller cover.
  • Remove debris stuck in the impeller house or impeller cover.

The Dolphin Explorer E30 Pool Cleaner moves but does not clean the pool

Cause Solution
  • Clogged filter basket.
  • Debris stuck in the impeller house or impeller cover
  • Clean the filter basket.
  • Remove debris stuck in the impeller house or impeller cover

The Dolphin Explorer E30 Pool Cleaner cleans only part of the pool.

Cause Solution
  • Power supply incorrectly positioned.
  • Not enough floating cable is released for the correct operation of the Robotic Pool Cleaner.
  • Place the power supply in a position so that the Pool Cleaner can freely reach all the pool area.
  • Check that there is enough slack in the floating cable for the Pool Cleaner to reach all of the pool.
  • Clean the filter basket

The Dolphin Explorer E30 floating cable has kinks.

Cause Solution
  • Clogged filter basket.
  • Debris stuck in the impeller-house or impeller-cover.
  • Clean the filter basket.
  • Remove debris stuck in the impeller-house or impeller-cover.
  • To remove the kinks, stretch the floating cable out completely and let it sit for at least a day in the sun.

The Dolphin Explorer E30 Pool Cleaner does not climb the walls.

Cause Solution
  • Clogged filter basket.
  • Algae on walls.
  • Unsuitable pH level.
  • Debris stuck in the impeller-house or impeller-cover.
  • Clean the filter basket.
  • Check the level of the chemicals of the water. Improper levels may allow the growth of algae making the walls slippery. If so, adjust the levels and scrub the walls.
  • Remove debris stuck in the impeller-house or impeller-cover.

 

Dolphin Explorer E30 Replacement Parts

How to Diagnose and Repair a Dolphin Explorer E30

This guide will help you identify and resolve issues with your Dolphin Explorer E30 Pool Cleaner.

Dolphin Explorer E30 Issues? Need Help?

Users are encouraged to share their tips or frustrations with their Dolphin Explorer E30 with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their pool cleaner and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a Dolphin Explorer E30 Question

If you're facing a particular issue with your Dolphin Explorer E30 and need assistance, feel free to ask your question here.

Submit Question

Related Pool Cleaner Problems