Craftsman Select 24 CMXGBAM213101 Troubleshooting

If you are having problems with your Craftsman Select 24 CMXGBAM213101 Snow Blower, you are not alone. Many Craftsman Select 24 CMXGBAM213101 owners experience issues with their snow blower from time to time, and it can be frustrating to deal with these problems.

I have problems with my Craftsman Select 24 CMXGBAM213101

Craftsman Select 24 CMXGBAM213101 Snow Blower Problems

Below are common issues and solutions for the Craftsman Select 24 CMXGBAM213101:

The Craftsman Select 24 CMXGBAM213101 is difficult to start, Engine runs erratic

Cause Solution
  • Defective spark plug
  • Replace the defective plug,
  • I_locked fuel line or empty gas tank
  • Clean fuel line; check fuel supply.

The Craftsman Select 24 CMXGBAM213101 Engine stalls; Loss of power; Engine runs erratic

Cause Solution
  • Unit running on CHOKE
  • Set the choke lever to the RUN position.
  • Obstruction in the impeller housing
  • Remove obstruction; clean impeller housing. Refer to Danger after Step 6 of the Craftsman CMXGBAM213101 Operation paragraph in the Operation section of this manual.
  • Water in fuel system
  • Remove the carburetor bowl to drain the fuel tank. Refill with fresh fuel

The Craftsman Select 24 CMXGBAM213101 Excessive vibration

Cause Solution
  • Loose parts; Damaged impeller
  • Stop the engine immediately; tighten all bolts and make all necessary repairs. If the vibration continues, have the unit serviced by a competent repairman,

The Craftsman Select 24 CMXGBAM213101Unit fails to propel itself

Cause Solution
  • Drive belt loss or defective
  • Replace the drive belt. Refer to the Drive Belt Replacement paragraph in the Maintenance section of this manual.
  • Broken shear bolt
  • Replace the drive belt. Refer to the Drive Belt Replacement paragraph in the Maintenance section of this manual.
  • The drive roller chain defective
  • Replace the roller chain. Refer to the Roller Chain Replacement paragraph in the Maintenance section of this manual.
  • Unit drive belt loss or defective
  • Adjust the unit drive belt; replace it if defective. Refer to the Drive Belt Adjustment paragraph in the Adjustment section or the Drive Belt Replacement paragraph in the Maintenance section of this manual

The Craftsman Select 24 CMXGBAM213101 Unit fails to propel itself

Cause Solution
  • Impeller drive belt loose or defective
  • Adjust impeller! auger drive belt; replace if defective. Refer to the Drive Belt Adjustment paragraph in the Adjustment section or the Drive Belt Replacement paragraph in the Maintenance section of this manual,
  • Impeller! Auger control out of adjustment
  • Adjust the impeller/auger control cable. Refer to Impeller/Auger Control Cable Adjustment paragraph in the Adjustment section of this manual,
  • Shear bolt broken
  • Replace the shear bolt. Refer to the Shear Bolt Replacement paragraph in the Maintenance section of this manual.
  • Discharge chute clogged
  • Clean discharge chute and inside of auger housing. Refer to Danger after Step 6 of the Craftsman CMXGBAM213101 Operation paragraph in the Operation section of this manual
  • Foreign objects lodged in auger
  • Remove the object from the auger. Refer to Danger after Step 6 of the Craftsman CMXGBAM213101 Operation paragraph in the Operation section of this manual,
  • Auger gear case trouble
  • Check the auger gear case for broken or bound parts and for oil level. See Unit Repair Parts section of this manual for the correct order of parts.
  • Transmission trouble
  • Have transmission checked by competent repairman.

Craftsman Select 24 CMXGBAM213101 Replacement Parts

How to Diagnose and Repair a Craftsman Select 24 CMXGBAM213101

This guide will help you identify and resolve issues with your Craftsman Select 24 CMXGBAM213101 Snow Blower.

Craftsman Select 24 CMXGBAM213101 Snow Blower Troubleshooting

Share your Craftsman Select 24 CMXGBAM213101 Snow Blower Problems, issues , tips, ideas, and frustrations with other owners.

  1. I Used snowblower in October worked great. No snow again until now and it will not start. Mine does not have a choke switch or knob like most videos show.

    I have owned it for only 4 months and used it twice when I first bought it.

    It does not start by using the pull cord and does not start with electric start.

    Reply

Craftsman Select 24 CMXGBAM213101 Issues? Need Help?

Users are encouraged to share their tips or frustrations with their Craftsman Select 24 CMXGBAM213101 with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their snow blower and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a Craftsman Select 24 CMXGBAM213101 Question

If you're facing a particular issue with your Craftsman Select 24 CMXGBAM213101 and need assistance, feel free to ask your question here.

Submit Question

Related Snow Blower Problems