Ariens Professional 926091 Troubleshooting

If you are having problems with your Ariens Professional 926091 Snow Blower, you are not alone. Many Ariens Professional 926091 owners experience issues with their snow blower from time to time, and it can be frustrating to deal with these problems.

I have problems with my Ariens Professional 926091

Ariens Professional 926091 Snow Blower Problems

Below are common issues and solutions for the Ariens Professional 926091:

The Ariens Professional 926091 Engine will not start

Cause Solution
  • The engine is turned off.
  • Turn the engine key to the run position. See Engine Key on page 10.
  • The fuel tank is empty
  • Fill the tank with fuel. See Before Operating Unit on page 13. ECU will display a red blink code. See Controls & Features on page 8. Refer to the Service Manual for your unit.
  • The ignition switch starter circuit is not functioning. (Electric start)
  • See your dealer for repair.
  • The spark plug wire is disconnected.
  • Connect the spark plug. Refer to the engine manual
  • A spark plug is faulty
  • Replace the spark plug. Refer to the engine manual
  • Engine is faulty
  • See your Ariens dealer or authorized engine manufacturer’s service center. Also, refer to your unit’s service manual
  • Battery is discharged
  • See Charge Battery on page 20. See Controls & Features on page 8. Refer to the Service Manual for your unit
  • The EFI battery is disconnected
  • Connect the EFI battery. See Start The Engine on page 13.
  • Plugged inline fuel filter
  • Replace the inline fuel filter. Refer to the Service Manual for your unit
  • The battery fuse is blown.
  • Fuses typically fail due to short circuits. See the dealer for repair.

The Ariens Professional 926091 Engine starts hard or runs poorly

Cause Solution
  • Plugged inline fuel filter
  • Replace the inline fuel filter. Refer to the Service Manual for your unit
  • Spark plug is faulty, fouled or incorrectly gapped.
  • Clean and correctly set spark plug gap (refer to engine manual) or see your Ariens dealer Clean and correctly set spark plug gap (refer to engine manual) or see your Ariens dealer
  • Fuel cap vent is blocked
  • Install new fuel cap.

The Ariens Professional 926091 Engine stops

Cause Solution
  • Fuel tank is empty
  • Fill tank with fuel. See Before Operating Unit on page 13. ECU will display a red blink code. See Controls & Features on page 8. Refer to the Service Manual for your unit.
  • Obstruction in auger or impeller
  • Stop engine, remove key and wait for all moving parts to stop. Check for and remove obstruction before restarting
  • Contaminated fuel supply
  • Replace with clean fuel
  • Engine is faulty.
  • See your Ariens dealer or authorized engine manufacturer’s service center. Also, refer to your unit’s service manual
  • Spark plug is faulty.
  • Replace or clean spark plug. Refer to engine manual
  • Fuel cap vent is blocked
  • Install new fuel cap
  • Battery is dead
  • See Charge Battery on page 20.
  • Plugged inline fuel filter
  • Replace inline fuel filter. Refer to the Service Manual for your unit

The Ariens Professional 926091 Unit runs briefly then stops

Cause Solution
  • A build up of fumes in the fuel tank is creating too much pressure in the fuel tank
  • Slowly loosen the fuel tank cap

The Ariens Professional 926091 Unit does not drive forward or in reverse

Cause Solution
  • Traction drive cable is not adjusted correctly
  • Remove slack from cable. See Adjust Traction Drive Clutch on page 25.
  • Traction belt is not functioning
  • Repair or replace traction drive belt. Refer to the service manual for your unit
  • Speed selector is not adjusted correctly
  • Adjust speed selector. See Adjust Speed Selector Lever on page 23.
  • Transmission is bypassed
  • Push the bypass rod in to engage the transmission for normal operation. See Move Unit Manually on page 15.

The Ariens Professional 926091 Unit does not throw snow or throws it poorly

Cause Solution
  • Shear bolts are broken
  • See Replace Shear Bolts on page 21.
  • Attachment clutch / brake is not adjusted correctly
  • See Adjust Attachment Clutch & Brake on page 23.
  • Impeller is frozen in place
  • Move unit to a warm place to thaw
  • Ice or debris is obstructing auger.
  • Stop engine, remove key and wait for moving parts to stop. Check for and remove obstruction before restarting
  • Discharge chute is clogged with snow
  • Stop engine, remove key and wait for all moving parts to stop and for hot parts to cool. Clean discharge chute and auger housing with clean-out tool. DO NOT use your hands
  • Auger drive belt is slipping, worn or damaged
  • Adjust or replace auger drive belt. Refer to the service manual for your unit
  • Auger drive belt is loose or damaged
  • Replace belt or adjust auger control cable. Refer to the service manual for your unit
  • Throttle control knob is in wrong position.
  • Ensure throttle control knob is set to high position

The Ariens Professional 926091 Excessive snow is left behind.

Cause Solution
  • Scraper blade is worn or damaged
  • Adjust when worn and replace when damaged or when blade has been adjusted down as far as possible and does not touch ground or clear correctly. See Adjust Scraper Blade on page 21.

The Ariens Professional 926091 Unit pulls to the left or right

Cause Solution
  • Skid shoes and scraper blade need adjustment
  • Adjust skid shoes and scraper blade. See Adjust Skid Shoes and Adjust Scraper Blade on page 21.

The Ariens Professional 926091 Belt squeals continuously.

Cause Solution
  • Impeller may be frozen
  • Move unit to a warm area to thaw
  • Attachment clutch needs adjustment
  • See Adjust Attachment Clutch & Brake on page 23.

The Ariens Professional 926091 Discharge chute controls do not work (Model 926091)

Cause Solution
  • System has self protected due to over-heating
  • DO NOT operate controls momentarily to allow protection feature to cool.

The Ariens Professional 926091 Discharge chute controls do not work after cooling (Model 926091)

Cause Solution
  • Fuse is blown
  • Check and replace fuse with fuse of equivalent rating. If fuse is not blown or continues to blow, refer to your Service Manual
  • Engine is not running
  • Start and run engine

Ariens Professional 926091 Replacement Parts

How to Diagnose and Repair a Ariens Professional 926091

This guide will help you identify and resolve issues with your Ariens Professional 926091 Snow Blower.

Ariens Professional 926091 Issues? Need Help?

Users are encouraged to share their tips or frustrations with their Ariens Professional 926091 with the community by leaving a comment. Sharing insights and experiences can help other users get the most out of their snow blower and avoid common issues.

Share your Thoughts or Describe your problem below:

The maximum upload file size: 5 MB. You can upload: image. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here

Ask a Ariens Professional 926091 Question

If you're facing a particular issue with your Ariens Professional 926091 and need assistance, feel free to ask your question here.

Submit Question

Related Snow Blower Problems